Forums GAMERGEN.COM

Bonsoir,

Je voulais graver un back up XGD2 avec imgburn, mais j'ai eu un soucis, alors que la dernière dois çà marchait, bref je suis perdu.

J'ai suivis ce tuto http://www.gamergen.com/tutoriels/dossi ... ux-14394-4

Mais quand je lance la gravure çà me met : " Set L0 Data Capacity Failed!
Reason: Unable to recover TOC"

Je comprend pas trop le soucis ... une idée ? :s

Merci et bonne soirée

À la place de graver, lance-le en test mode (sans graver).

Avant cela, sache qu'il te faut un graveur compatible pour graver des jeux Xbox XGD2 et XGD3.

XGD2 = layerbreak 1913760
XGD3 = calculate optimal (graveur classique)
XGD3 = layerbreak 2133520 (burner max)

Il en est de même pour les supports vierges. La marque Verbatim est quasi obligatoire. Test la gravure en 2,4x et une seconde fois en 4x.

Regarde en enlevant le Burn Proof puis revient nous dire ce qu'il en est.

Le test mode ne passe pas avec mon dvd selon imgburn...
Je sais que mon graveur peut le faire, je l'ai déjà fait avant :s ; mon LB est bon.

MON DVD DL
"hp DVD RAM UJ8C2 1.00 (RAID)
Current Profile: DVD+R DL

Disc Information:
Status: Empty
State of Last Session: Empty
Erasable: No
Free Sectors: 4 173 824
Free Space: 8 547 991 552 bytes
Free Time: 927:32:74 (MM:SS:FF)
Next Writable Address: 0
MID: RICOHJPN-D01-67
Supported Write Speeds: 2,4x

DVD±R DL Boundary Information:
L0 Data Zone Capacity: 2 086 912
Changeable: Yes"

LE MESSAGE IMGBURN AVEC LE BON LB et en 2,4.
" I 13:13:48 ImgBurn Version 2.5.8.0 started!
I 13:13:48 Microsoft Windows 8 Core x64 Edition (6.2, Build 9200)
I 13:13:48 Total Physical Memory: 4 088 088 KiB - Available: 1 707 728 KiB
I 13:13:48 Initialising SPTI...
I 13:13:48 Searching for SCSI / ATAPI devices...
I 13:13:48 -> Drive 1 - Info: DTSOFT BDROM 1.05 (F:) (Virtual)
I 13:13:48 -> Drive 2 - Info: hp DVD RAM UJ8C2 1.00 (E:) (RAID)
I 13:13:48 Found 1 DVD±RW/RAM and 1 BD-ROM!
I 13:14:40 Operation Started!
I 13:14:40 Source File: C:\Users\Julien\Downloads\MotoGP 14\MotoGP.14.PAL.XBOX360-COMPLEX.dvd
I 13:14:40 Source File Sectors: 3 827 488 (MODE1/2048)
I 13:14:40 Source File Size: 7 838 695 424 bytes
I 13:14:40 Source File Volume Identifier: 16537
I 13:14:40 Source File Volume Set Identifier: 5f7c8000MS UDFBridge
I 13:14:40 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 13:14:40 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 13:14:40 Source File File System(s): ISO9660; UDF (1.50)
I 13:14:40 Destination Device: [0:0:0] hp DVD RAM UJ8C2 1.00 (E:) (RAID)
I 13:14:40 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67)
I 13:14:40 Destination Media Supported Write Speeds: 2,4x
I 13:14:40 Destination Media Sectors: 4 173 824
I 13:14:40 Destination Media L0 Data Zone Capacity: 2 086 912 (Changeable: Yes)
I 13:14:40 Write Mode: DVD
I 13:14:40 Write Type: DAO
I 13:14:40 Write Speed: 2,4x
I 13:14:40 DVD+R DL Reserve Track: No
I 13:14:40 Link Size: Auto
I 13:14:40 Lock Volume: Yes
I 13:14:40 Test Mode: No
I 13:14:40 OPC: No
I 13:14:40 BURN-Proof: Disabled
I 13:14:40 Write Speed Successfully Set! - Effective: 3 324 KB/s (2,4x)
I 13:14:40 User Specified L0 Data Zone Capacity: 1 913 760
W 13:15:37 Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error
W 13:15:43 Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error
I 13:15:43 L0 Data Zone Capacity - Effective: 1 913 760
I 13:15:44 Filling Buffer... (80 MiB)
I 13:15:45 Writing LeadIn...
W 13:15:45 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error
W 13:15:45 Retrying (1 of 20)...
W 13:15:45 Retry Failed - Reason: Power Calibration Area Error
W 13:15:45 Retrying (2 of 20)...
W 13:15:45 Retry Failed - Reason: Power Calibration Area Error
W 13:15:45 Retrying (3 of 20)...
W 13:15:45 Retry Failed - Reason: Power Calibration Area Error
W 13:15:45 Retrying (4 of 20)...
W 13:15:45 Retry Failed - Reason: Power Calibration Area Error
W 13:15:45 Retrying (5 of 20)...
W 13:15:45 Retry Failed - Reason: Power Calibration Area Error
W 13:15:45 Retrying (6 of 20)...
W 13:15:45 Retry Failed - Reason: Power Calibration Area Error
W 13:15:45 Retrying (7 of 20)...
W 13:15:45 Retry Failed - Reason: Power Calibration Area Error
W 13:15:45 Retrying (8 of 20)...
W 13:15:45 Retry Failed - Reason: Power Calibration Area Error
W 13:15:45 Retrying (9 of 20)...
W 13:15:45 Retry Failed - Reason: Power Calibration Area Error
W 13:15:45 Retrying (10 of 20)...
W 13:15:45 Retry Failed - Reason: Power Calibration Area Error
W 13:15:45 Retrying (11 of 20)...
W 13:15:45 Retry Failed - Reason: Power Calibration Area Error
W 13:15:45 Retrying (12 of 20)...
W 13:15:45 Retry Failed - Reason: Power Calibration Area Error
W 13:15:45 Retrying (13 of 20)...
W 13:15:45 Retry Failed - Reason: Power Calibration Area Error
W 13:15:45 Retrying (14 of 20)...
W 13:15:45 Retry Failed - Reason: Power Calibration Area Error
W 13:15:45 Retrying (15 of 20)...
W 13:15:45 Retry Failed - Reason: Power Calibration Area Error
W 13:15:45 Retrying (16 of 20)...
W 13:15:45 Retry Failed - Reason: Power Calibration Area Error
W 13:15:45 Retrying (17 of 20)...
W 13:15:45 Retry Failed - Reason: Power Calibration Area Error
W 13:15:45 Retrying (18 of 20)...
W 13:15:45 Retry Failed - Reason: Power Calibration Area Error
W 13:15:45 Retrying (19 of 20)...
W 13:15:45 Retry Failed - Reason: Power Calibration Area Error
W 13:15:45 Retrying (20 of 20)...
W 13:15:45 Retry Failed - Reason: Power Calibration Area Error
W 13:15:48 Retrying (21)...
W 13:15:48 Retry Failed - Reason: Power Calibration Area Error
W 13:15:49 Retrying (22)...
W 13:15:49 Retry Failed - Reason: Power Calibration Area Error
E 13:15:50 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error
I 13:15:50 Synchronising Cache...
W 13:15:59 User opted to skip the 'Close Track/Session/Disc' functions.
E 13:15:59 Failed to Write Image!
E 13:15:59 Operation Failed! - Duration: 00:01:19
I 13:15:59 Average Write Rate: N/A - Maximum Write Rate: N/A"


Je comprend vraiment pas :s

Power Calibration Area Error :

> calibrage de la lentille nécessaire
> le lecteur n'est pas assez alimenté
> lecteur en fin de vie

> calibrage de la lentille nécessaire => Comment faire ?
> le lecteur n'est pas assez alimenté => Je suis sur PC portable, j'ai tenter avec et sans batterie, je tente sur un autre secteur.
> lecteur en fin de vie => PC récent et cela marché il y a 1 mois :s


Vous pensez que nettoyer ma lentille avec de l'alcool peut aider ?

S'il est récent, je ne pense pas que ce soit le calibrage.
Vu que c'est un lecteur interne, ce n'est l'alimentation de celui-ci.

Tu peux nettoyer la lentille avec de l'alcool sur un coton tige.
Repasse nous voir si cela ne fonctionne toujours pas.

Je viens nettoyer le tout et toujours ce soucis, j'ai plus d'idée ....

Je sais pas si ca tue mes dvd aussi

PS: je me suis mit en performance élevé aussi mais rien n'y fais !

=> J'ai ce message aussi "W 20:45:12 Retry Failed - Reason: Unable to Recover TOC"


Merci de ton aide !

Tu peux tenter de désinstaller le pilote du graveur et de rebooter ton PC.

Je pense plus à un conflit pilote ou matériel. Mais lequel ?..

Voici quelques réglages :
-force hypertuning on
-online hypertuning on
-overspeed on
-smartburn on
-chaque gravure je clear l'opc

Dans imgburn settings :
-perform op before write
-vitesse 4x
-burnproof off
-layerbreaker calculoptimal
-buffer 512

Tu aussi tenter de graver en lançant ta bécane en Mode sans échec.

Rien ne marche incroyable

"I 14:07:27 ImgBurn Version 2.5.8.0 started!
I 14:07:27 Microsoft Windows 8 Core x64 Edition (6.2, Build 9200)
I 14:07:27 Total Physical Memory: 4 088 088 KiB - Available: 1 665 576 KiB
I 14:07:27 Initialising SPTI...
I 14:07:27 Searching for SCSI / ATAPI devices...
I 14:07:27 -> Drive 1 - Info: DTSOFT BDROM 1.05 (F:) (Virtual)
I 14:07:27 -> Drive 2 - Info: hp DVD RAM UJ8C2 1.00 (E:) (RAID)
I 14:07:27 Found 1 DVD±RW/RAM and 1 BD-ROM!
I 14:09:21 Operation Started!
I 14:09:21 Source File: C:\Users\Julien\Desktop\JV\MGS V\complex-metal.gear.solid.v.ground.zeroes.dvd
I 14:09:21 Source File Sectors: 3 827 488 (MODE1/2048)
I 14:09:21 Source File Size: 7 838 695 424 bytes
I 14:09:21 Source File Volume Identifier: 16537
I 14:09:21 Source File Volume Set Identifier: 5f7c8000MS UDFBridge
I 14:09:21 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 14:09:21 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 14:09:21 Source File File System(s): ISO9660; UDF (1.50)
I 14:09:21 Destination Device: [0:0:0] hp DVD RAM UJ8C2 1.00 (E:) (RAID)
I 14:09:22 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67)
I 14:09:22 Destination Media Supported Write Speeds: 2,4x
I 14:09:22 Destination Media Sectors: 4 173 824
I 14:09:22 Destination Media L0 Data Zone Capacity: 2 086 912 (Changeable: Yes)
I 14:09:22 Write Mode: DVD
I 14:09:22 Write Type: DAO
I 14:09:22 Write Speed: 4x
I 14:09:22 DVD+R DL Reserve Track: No
I 14:09:22 Link Size: Auto
I 14:09:22 Lock Volume: Yes
I 14:09:22 Test Mode: No
I 14:09:22 OPC: Yes
I 14:09:22 BURN-Proof: Disabled
W 14:09:22 Write Speed Miscompare! - Wanted: 5 540 KB/s (4x), Got: 3 324 KB/s (2,4x)
W 14:09:22 The drive only supports writing these discs at 2,4x.
W 14:09:42 Optimum Power Calibration Failed! - Reason: Unknown (ASC: 0x09, ASCQ: 0x90)
W 14:09:47 Retrying (1)...
W 14:09:47 Retry Failed - Reason: Power Calibration Area Error
W 14:09:48 Retrying (2)...
W 14:09:48 Retry Failed - Reason: Power Calibration Area Error
W 14:09:49 Optimum Power Calibration Failed! - Reason: Power Calibration Area Error
I 14:09:49 Optimal L0 Data Zone Capacity: 1 913 760
I 14:09:49 Optimal L0 Data Zone Method: Copied From Original Disc
W 14:09:49 Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error
W 14:09:50 Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error
I 14:09:50 L0 Data Zone Capacity - Effective: 2 086 912
I 14:09:50 Filling Buffer... (80 MiB)
I 14:09:51 Writing LeadIn...
W 14:09:51 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error
W 14:09:51 Retrying (1 of 20)...
W 14:09:51 Retry Failed - Reason: Power Calibration Area Error
W 14:09:51 Retrying (2 of 20)...
W 14:09:51 Retry Failed - Reason: Power Calibration Area Error
W 14:09:51 Retrying (3 of 20)...
W 14:09:51 Retry Failed - Reason: Power Calibration Area Error
W 14:09:51 Retrying (4 of 20)...
W 14:09:51 Retry Failed - Reason: Power Calibration Area Error
W 14:09:51 Retrying (5 of 20)...
W 14:09:51 Retry Failed - Reason: Power Calibration Area Error
W 14:09:51 Retrying (6 of 20)...
W 14:09:51 Retry Failed - Reason: Power Calibration Area Error
W 14:09:51 Retrying (7 of 20)...
W 14:09:51 Retry Failed - Reason: Power Calibration Area Error
W 14:09:51 Retrying (8 of 20)...
W 14:09:51 Retry Failed - Reason: Power Calibration Area Error
W 14:09:51 Retrying (9 of 20)...
W 14:09:51 Retry Failed - Reason: Power Calibration Area Error
W 14:09:51 Retrying (10 of 20)...
W 14:09:51 Retry Failed - Reason: Power Calibration Area Error
W 14:09:51 Retrying (11 of 20)...
W 14:09:51 Retry Failed - Reason: Power Calibration Area Error
W 14:09:51 Retrying (12 of 20)...
W 14:09:51 Retry Failed - Reason: Power Calibration Area Error
W 14:09:51 Retrying (13 of 20)...
W 14:09:51 Retry Failed - Reason: Power Calibration Area Error
W 14:09:51 Retrying (14 of 20)...
W 14:09:51 Retry Failed - Reason: Power Calibration Area Error
W 14:09:51 Retrying (15 of 20)...
W 14:09:51 Retry Failed - Reason: Power Calibration Area Error
W 14:09:51 Retrying (16 of 20)...
W 14:09:51 Retry Failed - Reason: Power Calibration Area Error
W 14:09:51 Retrying (17 of 20)...
W 14:09:51 Retry Failed - Reason: Power Calibration Area Error
W 14:09:51 Retrying (18 of 20)...
W 14:09:51 Retry Failed - Reason: Power Calibration Area Error
W 14:09:51 Retrying (19 of 20)...
W 14:09:51 Retry Failed - Reason: Power Calibration Area Error
W 14:09:51 Retrying (20 of 20)...
W 14:09:51 Retry Failed - Reason: Power Calibration Area Error
E 14:09:53 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error
I 14:09:53 Synchronising Cache...
W 14:09:55 User opted to skip the 'Close Track/Session/Disc' functions.
E 14:09:55 Failed to Write Image!
E 14:09:55 Operation Failed! - Duration: 00:00:33
I 14:09:55 Average Write Rate: N/A - Maximum Write Rate: N/A"


Etrange, c'est la première fois que j'ai ce soucis...


Tu pense que mes dvd sont mort pour voir si je les jettent ? Y'a une trace de gravure donc bon.

Au pire je tenterais de les graver ailleurs.

Si l'écriture à commencé sur le support, il n'est plus vierge donc inutilisable. Logiquement, le logiciel t'en informe en te demandant d'en insérer un autre.

Tu as tenté de graver en démarrant ta bécane en mode sans échec ?

Oui et c'est pareil, c'est fou l'informatique, aucune raison/logique.

Logiquement, la gravure doit se faire avec plus ou moins de finesse pour arriver à la presque exactitude d'un jeu original.
Aussi-non, dirige-toi vers un graveur externe compatible ou un graveur Liteon interne à placer dans un boîtier USB2.0.
Ça toujours été un peu galère sur PC portable...